CARPRO ClearCut

CARPRO ClearCut is a fast-cut paint correction compound that removes scratches as deep as P1000 while producing very little dust. It contains no wax, fillers or silicone and is body-shop safe. CARPRO describes it for a two-step correction on any paint or a one-step process on many medium-to-hard paint finishes.

Dual-action machine

1. Use a clean, dry pad. Work a very thin layer of compound into the pad, then add 3–4 pea-sized drops.
2. Spread the product over one section and raise the machine speed to medium/high.
3. Use minimal pressure for the first 2–3 passes, then increase pressure with each pass.
4. When the scratches disappear or the polish turns clear, wipe with a microfiber towel and clean the pad.
5. For the next section, add 2–4 pea-sized drops and repeat.

Rotary machine

1. Prime a clean, dry pad with a very thin layer and add 3–4 pea-sized drops.
2. Spread over one section. Use low speed and low pressure.
3. Use minimal pressure for the first 1–2 passes, then increase it slightly. Keep the machine at no more than 1,000–1,200 rpm.
4. When the scratches disappear or the polish turns clear, wipe with a microfiber towel and clean the pad.
5. For the next section, add 2–4 pea-sized drops and repeat.

Available from this seller in 250 ml, 500 ml, 1 L and 4 L options.